For Enquiries : info@metalli-italia.com


Non ferrous metal scrap according to the international commercial standards.

Berry — No. I Copper Wire Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B&S wire gauge, free of burnt wire which is brittle. Hydraulically briquetted copper subject to agreement.

Birch — No. 2 Copper Wire Shall consist of miscellaneous, unalloyed copper wire having a nominal 96 % copper content (minimum 94 %) as determined by electrolytic assay. Should be free of the following: Excessively leaded, tinned, soldered copper wire; brass and bronze wire; excessive oil content, iron, and non-metallics; copper wire from burning, containing insulation; hair wire; burnt wire which is brittle; and should be reasonably free of ash. Hydraulically briquetted copper wire subject to agreement.

Candy — No. i Heavy Copper Shall consist of clean, unalloyed, uncoated copper clippings, punchings, bus bars, commutator segments, and wire not less than 1/16 of an inch thick, free of burnt wire which is brittle; but may include clean copper tubing. Hydraulically briquetted copper subject to agreement.

Cliff — No. 2 Copper Shall consist of miscellaneous, unalloyed copper scrap having a nominal 96 % copper content (minimum 94 %) as determined by electrolytic assay. Should be free of the following: Excessively leaded, tinned, soldered copper scrap; brasses and bronzes; excessive oil content, iron and non-metallics; copper tubing with other than copper connections or with sediment; copper wire from burning, containing insulation; hair wire; burnt wire which is brittle; and should be reasonably free of ash. Hydraulically briquetted copper subject to agreement.

Dream — Light Copper Shall consist of miscellaneous, unalloyed copper scrap having a nominal 92 % copper content (minimum 88 %) as determined by electrolytic assay and shall consist of sheet copper, gutters, down spouts, kettles, boilers, and similar scrap. Should be free of the following: Burnt hair wire; copper clad; plating racks; grindings; copper wire from burning, containing insulation; radiators; lire extinguishers; refrigerator units electrotype shells; screening; excessively leaded, tinned, soldered scrap; brasses and bronzes; excessive oil, iron and non-metallics; and should be reasonably free of ash. Hydraulically briquetted copper subject to agreement. Any items excluded in this grade are also excluded in the higher grades above.

Drink — Refinery Brass Shall contain a minimum of 61,3 % copper and maximum 5 % iron and to consist of brass and bronze solids and turnings, and alloyed and contaminated copper scrap. Shall be free of insulated wire, grindings, electrotype shells and non-metallics. Hydraulically briquetted material subject to agreement.

Drove — Copper-Bearing Scrap Shall consist of miscellaneous copper-containing skimmings, grindings, ashes, irony brass and copper, residues and slags. Free of insulated wires; copper chlorides; unprepared tangled material; large motors; pyrophoric material; asbestos brake linings; furnace bottoms; high lead materials; graphite crucibles; and noxious and explosive materials. Fine powdered material by agreement. Hydraulically briquetted material subject to agreement.

Ebony — Composition or Red Brass Shall consist of red brass scrap, valves, machinery bearings, and other machinery parts, including miscellaneous castings made of copper, tin, zinc, and/or lead. Should be free of semi-red brass castings (78 % to 81 % copper); railroad car boxes and other similar high-lead alloys; cocks and faucets; gates; pot pieces; ingots and burned brass; aluminium and manganese bronzes; iron and non-metallics. No piece to measure more than 12’ over any one part or weigh over 100 lbs.

Enerv — Red Brass Composition Turnings Shall consist of turnings from red brass composition material and should be sold subject to sample or analysis.

Elder — Genuine Babbitt-Lined Brass Bushings Shall consist of red brass bushings and bearings from automobiles and other machinery, shall contain not less than 12 % high tin base Babbitt, and shall be free of iron-backed bearings.

Eland — High Grade — Low Lead Bronze Solids It is recommended these materials be sold by analysis.

Elbow — Bronze Paper Mill Wire Cloth Shall consist of clean genuine Fourdrinier wire cloth and screen having a minimum copper content of 87 %, minimum tin content of 3 %, and a maximum lead content of 1 %, free of stainless steel and Monel metal stranding.

Elias— High lead Bronze Solids and Borings It is recommended that these materials be sold on sample or analysis.

Engel — Machinery or Hard Brass Solids Shall have a copper content of not less than 75 %, a tin content of not less than 6 %, and a lead content of not less than 6 % - nor more than 11 %, and total impurities, exclusive of zinc, antimony, and nickel of not more than 0,75 %; the antimony content not to exceed 0,50 %. Shall be free of lined and unlined standard red car boxes.

Erin — Machinery or Hard Brass Borings Shall have a copper content of not less than 75 %, a tin content of not less than 6 % and a lead content of not less than 6 % — nor more than 11 %, and the total impurities, exclusive of zinc, antimony, and nickel of not more than 0,75 %; the antimony content not to exceed 0,50 %.

Fence — Unlined Standard Red Car Boxes (Clean Journals) Shall consist of standard unlined and/or sweated railroad boxes and unlined and/or sweated car journal bearings, free of yellow boxes and iron-backed boxes.

Ferry — Lined Standard Red Car Boxes (Lined Journals) Shall consist of standard Babbitt-lined railroad boxes and/or Babbitt-lined car journal bearings, free of yellow boxes and iron backed boxes.

Grape — Cocks and Faucets Shall consist of mixed clean red and yellow brass, including chrome or nickel-plated, free of gas cocks, beer faucets, and aluminium and zinc base die cast material, and to contain a minimum of
35 % sermi-red.

Greet — Mixed Brass Screens To consist of clean mixed copper, brass and bronze screens, and to ba free of excessively dirty and painted material.

Honey — Yellow Brass Scrap Shall consist of brass castings, rolled brass, rod brass, tubing and miscellaneous yellow brasses, including plated brass. Must be free of manganese-bronze, aluminium-bronze, unsweated radiators or radiator parts, iron, excessively dirty and corroded materials.

Ivory — Yellow Brass Castings Shall consist of yellow brass castings in crucible shape, no piece to measure more than 12 inches over any one part; and shall be free of brass forgings, silicon bronze, aluminium bronze and manganese bronze, and not to contain more than 15 % nickel plated material.

Knife — Old Rolled Brass Shall consist of old pieces of yellow sheet brass and yellow light tubing brass, free from solder, tinned and nickel plated material, iron, paint and corrosion, rod brass and condenser tubes.

Label — New Brass Clippings Shall consist of the cuttings of new unleaded yellow brass sheet, to be clean and free from foreign substances and not to contain more than 10 % of clean brass punchings under ¼ ‘’ To be free of Muntz metal and naval brass.

Lace — Brass Shell Cases Without Primers Shall consist of clean fired 70/30 brass shell cases free of primers and any other foreign material.

Lady — Brass Shell Cases with Primers Shall consist of clean fired 70/30 brass shell cases containing the brass primers and which contain no other foreign material.

Lake — Brass Small Arms and Rifle Shells, Clean Fired Shall consist of clean fired 70/30 brass shells free of bullets, iron and any other foreign material.

Lamb — Brass Small Arms and Rifle Shells, Clean Muffled (Popped) Shall consist of clean muffled (popped) 70/30 brass shells free of bullets, iron and any other foreign material.

Lark — Yellow Brass Primer Shall consist of clean yellow brass primers, burnt or unburnt. Free of iron, excessive dirt, corrosion and any other foreign material.

Melon — Brass Pipe Shall consist of brass pipe free of plated and soldered materials or pipes with cast brass connections. To be sound, clean pipes free of sediment and condenser tubes.

Night — Yellows Brass Rod Turnings Shall consist of strictly rod turnings, free of aluminium, manganese, composition, Tobin and Muntz metal turnings; not to contain over 3 % free iron, oil or other moisture; to be free of grindings and babbitts; to contain not more than 0,30 % tin and not more than 0,15 % alloyed iron.

Noble — New Yellow Brass Rod Ends Shall consist of new, clean rod ends from free turning brass rods or forging rods not to contain more than 0,30 % tin and not more than 0,15 % alloyed iron. To be free of Muntz metal and naval brass or any other alloys. To be in pieces not larger than 12’’ and free of foreign matter.

Nomad —Yellow Brass Turnings Shall consist of yellow brass turnings, free of aluminium, manganese and composition turnings; not to contain over 3 % of free iron, oil or other moisture; to be free of grindings and babbitts. To avoid dispute, to be sold subject to sample or analysis.

Ocean — Mixed Unsweated Auto Radiators Shall consist of mixed automobile radiators, to be free of aluminium radiators, and iron finned radiators. All radiators to be subject to deduction of actuel iron. The tonnage specification should cover the gross weight of the radiators, unless otherwise specified.

Pales — Admiralty Brass Condenser Tubes Shall consist of clean Sound Admiralty condenser tubing which may be plated or unplated, free of nickel alloy, aluminium alloy, and corroded material.

Pallu — Aluminium Brass Condenser Tubes Shall consist of clean sound condenser tubing which may be plated or unplated, free of nickel alloy, and corroded material.

Palms — Muntz Metal Tubes Shall consist of clean Sound Muntz metal tubing which may be plated or unplated, free of nickel alloy, aluminium alloy, and corroded material.

Pants — Plated Rolled Brass Shall consist of plated brass sheet, pipe tubing, and reflectors, free of soldered, tinned, corroded, and aluminium painted material, Muntz metal and Admiralty tubing, and material with cast brass connections.

Parch — Manganese Bronze Solids Shall have a copper content of not less than 55 %, a lead content of not more than 1 %, and shall be free of Aluminium bronze and Silicon bronze.

Racks — Scrap Lead — Soft Shall consist of clean soft scrap lead, free of all foreign materials such as drosses, battery lead, lead covered cable, hard lead, collapsible tubes, foil, type metals, zinc, iron and brass fittings, dirty chemical lead. Free of radioactive materials.

Radio — Mixed Hard/Soft Scrap Lead Shall consist of clean lead solids, free of foreign materials, such as drosses, battery lead, lead covered cable, collapsible tubes, type metals, zinc, iron and brass fittings, dirty chemical lead. Free of radioactive materials.

Rails — Battery Plates If cells (plates, separators, and lugs) or battery plates, must be reasonably free of rubber. May be bought and sold by assay or as agreed between buyer and seller.

Rains — Drained Whole Batteries Batteries to be free of liquid and extraneous material content. Aircraft (aluminium or steel cased) and other special batteries subject to special agreement.

Rakes — Battery Lugs Shall be free from battery plates, rubber and foreign material. A minimum of 97 % metallic content is required.

Ranks — Pewter Shall consist of tableware and soda-fountain boxes but should contain a minimum of 84 % tin. Siphon tops to be accounted for separately. Material must be free of brass, zinc, and other foreign metals.

Ranch — Block Tin Block Tin must assay minimum of 98 % tin, and to be free of liquids, solder, and brass connections, pewter, pumps, pot pieces, dirt.

Raves — High Tin Base Babbitt Shall contain a minimum of 78 % tin and be free of brassy or zincy metals.

Relay — Lead Covered Copper Cable Free of armored covered cable, and foreign material.

Rents — Lead Dross Should be clean and reasonably free of foreign matter, iron, dirt, harmful chemicals or other metals. Free or radioactive materials. Assay basis, or as agreed between buyer and seller. Other metals present such as antimony, tin, etc. to be accounted for as agreed between buyer and seller.

Ropes — Lead Weights May consist of lead balances with or without iron, as may be specified. Free of foreign materials.

Roses — Mixed Common Babbitt Shall consist of lead base bearing metal containing not less than 8 % tin, free from Allens Metal, Ornamental, Antimonial and Type Metal. Must be free from all zincy and excessive copper in the alloy.

Saves — Old Zinc Pie Cast Scrap Shall consist of miscellaneous old zinc base die castings, with or without iron and other foreign attachments. Must be free of borings, turnings, dross pieces, chunks, melted pieces and skimmings. All unmeltables, dirt, foreign attachments, and volatile substances (such as rubber, cork, plastic, grease, etc.) are deductible. Material containing in excess of 30 % iron will not constitute good delivery.

Scabs — New Zinc Pie Cast Scrap Shall consist of new or unused, clean, zinc base die castings. Castings to be unplated, unpainted, and free from corrosion.

Scope — New Plated Zinc Pie Cast Scrap Shall consist of new or unused clean, plated zinc base die castings, free from corrosion.

Scoot — Zinc Pie Cast Automotive Grilles Shall consist of clean, old or used zinc base die cast automotive grilles, free from soldered material. All foreign attachments and extraneous material are deductible.

Score — Old Scrap Zinc Shall consist of clean dry scrap zinc, such as sheets, jar lids, clean unalloyed castings and anti-corrosion plates. Borings and turnings are not acceptable. Material must not be excessively corroded or oxidized. All foreign attachments and extraneous materials are deductible.

Screen — New Zinc Clippings Shall consist of any new pure zinc sheets or stampings free from corrosion. To contain no foreign material or attachments. Printers zinc, such as engravers zinc, lithograph sheets and addressograph plates subject to special arrangements. Printers zinc to be free of routings.

Scull — Zinc Pie Cast Slabs or Pigs Shall consist of melted zinc base die cast materials, in smooth clean solid slabs or pigs. Material to be free from drosses and to contain a minimum zinc content of 90 %.

Scrub — Galvanizers Slab Zinc Dross Shall consist of galvanizers unsweated zinc dross in slabs with a minimum zinc content of 92 % and shall be free of skimmings. Broken metallic pieces under 2” in diameter shall not exceed 10 % of the weight of each shipment. Slabs shall not weight over 100 pounds each.

Shelf — Prime Zinc Die Cast Dross Shall consist of metal skimmed from the top of pot of molten zinc die cast metal. Must be unsweated, unfluxed, shiny, smooth, metallic and free from corrosion or oxidation. Should be poured in molds or in small mounds weighing not over 75 pounds each. Zinc shall be a minimum
of 85 %. Any other grades of zinc-bearing materials not mentioned are subject to special arrangement.

Table — New Pure Aluminium Clippings Shall consist of new, clean, unalloyed sheet clippings and/or aluminium sheet cuttings, free from oil and grease, foil and any other foreign substances and from punchings less than ½’’ in size.

Taboo — Mixed Low Copper Aluminium Clippings and Solids Shall consist of new, clean, uncoated and unpainted low copper aluminium scrap of two or more alloys and to be free of foil, hair wire, wire screen, dirt, and other foreign substances. Grease and oil not to total more than 1 %. Also free from punchings less than ½” in size. New can stock subject to arrangement between buyer and seller.

Tabor — Mixed Old Alloy Sheet Aluminium Shall consist of clean old alloy sheet aluminium of two or more alloys and to be free of 70 S series, foil, Venetian blinds, castings, hair wire, screen wire, food or beverage containers, pie plates, dirt, and other foreign substances. Oil and grease not to total more than 1 %. Up to 10 % painted sidings and awnings permitted.

Taint — Scrap Sheet and Sheet Utensil Aluminium Shall consist of clean, unpainted old 2 S or 3 S aluminium sheet and sheet utensils, free from hub caps, radiator shells, airplane sheet, foil, food or beverage containers, pie plates, oil cans and bottle caps, dirt, and other foreign substances. Oil and grease not to total more than 1 %.

Talon — New Pure Aluminium Wire and Cable Shall consist of new, clean, unalloyed aluminium wire or cable free from hair wire, wire screen, iron, insulation and any other foreign substance.

Taste — Old Pure Aluminium Wire and Cable Shall consist of old, unalloyed aluminium wire or cable containing not over 1 % free oxide or dirt and free from hair wire, wire screen, iron, insulation and any other foreign substance.

Tarry — Aluminium Pistons (a) Clean Aluminium Pistons Shall consist of clean aluminium pistons to be free from struts, bushings, shafts, iron rings and any other foreign materials. Oil and grease not to exceed 2 %. (b) Aluminium Pistons with Struts Shall consist of clean whole aluminium pistons with struts to be free froin bushings, shafts, iran rings and any other foreign materials. Oil and grease not to exceed 2 %. (c) Irony Aluminium Pistons Should be sold on recovery basis, or by special arrangements with purchaser.

Teens — Segregated Aluminium Borings and Turnings Shall consist of clean, uncorroded aluminium borings and turnings of one specified alloy only and subject to deductions for fines in excess of 3 % through a 20 mesh screen and dirt, free iron, oil, moisture and all other foreign materials. Material containing iron in excess of 10 % and/or free magnesium or stainless steel or containing highly flammable cutting compounds will not constitute good delivery.

Telic — Mixed Aluminium Borings and Turnings Shall consist of clean, uncorroded aluminium borings and turnings of two or more allays and subject to deductions for fines in excess of 3 % through a 20 mesh screen and dirt, free iron, oil, moisture and all other foreign materials. Material containing iron in excess of 10 % and/or free magnesium or stainless steel or containing highly flammable cutting componds will not constitute good delivery. To avoid dispute should be sold on basis of definite maximum zinc, tin and magnesium content.

Tense — Mixed Aluminium Castings Shall consist of all clean aluminium castings which may contain auto and airplane castings but no ingots, and to be free of iron, dirt, brass, Babbitt, and any other foreign materials. Oil and grease not to total more than 2%.

Tepid — Wrecked Airplane Sheet Aluminium Should be sold an recovery basis or by special arrangements with purchaser.

Terse — New Aluminium Foil Shall consist of clean, new, pure, uncoated, unalloyed aluminium fail, free from anodized foil, radar foil and chaff, paper, plastics, or any other foreign materials. Hydraulically briquetted material by arrangement only.

Testy — Old Aluminium Foil Shall consist of clean, old, pure, uncoated, unalloyed aluminium foil, free from anodized foil, radar foil and chaff, paper, plastics, or any other foreign materials. Hydraulically briquetted material by arrangement only.
Thigh — Aluminium Grindings Should be sold an recovery basis or by special arrangements with purchaser.

Thirl — Aluminium Drosses, Spatters, Spillings, Skimmings and Sweepings
Should be sold on recovery basis or by special arrangements with purchaser.

Throb — Sweated Aluminium Shall consist of aluminium scrap which has been sweated or melted into a form or shape such as an ingot, pig or slab for convenience in shipping; to be free from corrosion, drosses or any foreign materials. Should be sold subject to sample or analysis.

Tooth — Segregated New Aluminium Alloy Clippings and Solids
Shall consist of new, clean, uncoated and unpainted aluminium scrap of one specified aluminium alloy only and to be free of foil, hair wire, wire screen, dirt, and other foreign substances. Oil and grease not to total more than 1 %. Also free from punchings less than ½’’ in size. New can stock subject to arrangement between buyer and seller.

Tough — Mixed New Aluminium Alloy Clippings and Solids Shall consist of new, clean, uncoated and unpainted aluminium scrap of two or more alloys free of 70 S series and to be free of foil, hair wire, wire screen, dirt, and other foreign substances. Oil and grease not to total more than 1 %. Also free from punchings less than ½‘’ in size.

Tread — Segregated New Aluminium Castings, Forgings and Extrusions
Shall consist of new, clean, uncoated aluminium castings, forgings, and extrusions of one specified alloy only and to be free from sawings, stainless steel, zinc, iron, dirt, oil, grease and other foreign substances.

Trump — Aluminium Auto Castings Shall consist of all clean automobile aluminium castings of sufficient size to be readily identified and to be free from iron, dirt, brass, Babbitt bushings, brass bushings, and any other foreign materials. Oil and grease not to total more than 2%.

Twist — Aluminium Airplane Castings Shall consist of clean aluminium castings from airplanes and to be free from iron, dirt, brass, Babbitt bushings, brass bushings, and any other foreign materials. Oil and grease not to total more than 2 %. Items not covered specifically in aluminium scrap specifications should be discussed and sold by special arrangements between buyer and seller.

Aroma — New Nickel Scrap Shall consist of new clippings, plate, skeleton and all other rolled shapes. Nickel plus Cobalt minimum — 99 % Cobalt maximum — 0,25 % Copper maximum — 0,50 % This grade shall be free of all castings

Burly — Old Nickel Scrap All rolled nickel scrap shall come under this classification. Shall consist of clean scrap and shall be free of soldered, brazed, sweated, welded, or painted material. Nickel minimum — 98 % Copper maximum — 0,50 %

Cache — Miscellaneous Nickel Scrap Shall consist of miscellaneous Nickel Scrap such as Carbonized Scrap, Castings, Strippings, Peelings, Baskets and/or Turnings, and shall be packed and sold separately on basis of analysis.

Complex — S 816 ETC. Shall consist of alloys in which the principal constituents ere nickel, cobalt, chromium, and other alloying elements. It shall be sold on the basis of description and analysis. (This category refers to such alloys as Hastelloys, Stellites, S-816 etc.)

Daffy — Ni-Resist Solids Shall consist of clean Ni-Resist Solids and shall be sold according to type or analysis (Type 1 — approximately 6 % Copper, all others, such as Types II, III, IV and V — free of Copper); shipment shall be of uniform grade unless otherwise agreed on by buyer and seller and must be free of foreign attachments and all other contamination.

Daisy — NI-Resist Borings Shall consist of clean and dry Ni-Resist Borings and shall be sold according to type or analysis (Type I — approximately 6% copper, all others, such as Types II, III, IV and V — free of Copper); shipment shall be of uniform grade unless otherwise agreed on by buyer and seller. Must be free of all contamination.

Dandy — New Cupro-Nickel Clippings and Solids Shall consist of new, clean Cupro-Nickel, clippings, plate, pipe, and other rolled forms. The shipment must be of a uniform grade and form agreed on by buyer and seller, whether it be 70 Copper 30 Nickel, 80 Copper 20 Nickel, 90 Copper 10 Nickel, or any other standard Copper Nickel Alloy. Must ha free of foreign attachments and all other contamination.

Daunt — Old Cupro-Nickel Solids Shall consist of old, clean Cupro-Nickel Solids. The shipment must be of a uniform grade agreed on by buyer and seller, whether it be 70 Copper 30 Nickel, 80 Copper 20 Nickel, 90 Copper 10 Nickel, or any other standard Copper Nickel Alloy. It must be free of soldered, brazed or sweated material, as well as foreign attachments and all other contamination. Mixed solids should be packed and sold separately.

Delta — Soldered Cupro-Nickel Solids Shall consist of soldered, brazed or sweated Cupro-Nickel Solids. The shipment must be of a uniform grade agreed on by buyer and seller, whether it be 70 Copper 30 Nickel, 80 Copper 20 Nickel, 90 Copper 10 Nickel, or any other standard Copper Nickel Alloy. Must ho free of trimmed seams and edges, and all other contamination. Mixed solids should be packed and sold separately.

Decoy — Cupro-Nickel Turnings and Borings Shall consist of clean and dry Cupro-Nickel Turnings and Borings. The shipment must be of a uniform grade agreed on by buyer and seller, whether it be 70 Copper 30 Nickel, 80 Copper 20 Nickel, 90 Copper 10 Nickel, or any other standard Copper Nickel Alloy. Mixed Turnings should be packed and sold separately. Must be free of all contamination.

Depth — Miscellaneous Nickel Copper and Nickel-Copper-Iron Scrap Shall consist of miscellaneous scrap in which the basic elements, by weight, are Nickel and Copper such as Copper Nickel Peelings, Plating Racks and Hangers and all Nickel and Copper in attached or combined form. In all cases, miscellaneous Nickel Copper Scrap should be sold by description and analysis.

Hitch — New Monel Clippings and Solids Shall consist of new, clean, regular and/or R-Monel Clippings, plate, and other rolled shapes. Must be free of foreign attachments and all other contamination.

House — Monel Rods and Forgings Shall consist of regular and/or R-Monel Rods and Forgings. K and KR Monel Rods and Forgings must be packed and sold separately. Must be free of foreign attachments and all other contamination.

Ideal — Old Monel Sheet and Solids Shall consist of clean, regular and/or R-Monel Solids, such as Sheet, Plate, Pipe, Rods and Forgings, and Screen or Wire Cloth. Must be free of foreign attachments and all other contamination, soldered, brazed, welded or sweated material.

Junto — Soldered Monel Sheet and Solids Shall consist of soldered and/or brazed regular and/or R-Monel sheet and Solids. Must be free of trimmed seams and edges and all other contamination.

Kamis — Soldered Monel Wire, Screen and Cloth Shall consist of soldered and/or brazed Regular Monel Wire, Screen and Cloth. Must be free of trimmed seams and edges, non-metallic filling, and all other contamination.

Karat — New Monel Wire, Screen and Cloth Shall consist of new, clean Regular Monel Wire, Screen and Cloth, free of soldered material, as well as all other contamination.

Lemon — Monet Castings Must contain a minimum of 60 % Nickel and shall consist of clean 1regular, S or H Monel Castings. Must be free of foreign attachments and all other contamination.

Lemur — Monel Turnings and Borings Must contain a minimum of 60 % Nickel and shall consist of clean and dry Regular and R-Monel Turnings and Borings. K, KR, S, H or mixed Monel Turnings and Borings must be packed and sold separately. Must be free of all contamination.

Maize — Mixed New Nickel Silver Clippings Shall consist of one or more nickel silver alloys and the range of nickel content to be specified, free of chrome or any other plating material. Leaded nickel silver clippings should be packed and sold separately. Not to contain more than 10 % of clean punchings under ¼ inch.

Major — New Nickel Silver Clippings and Solids Shall consist of new, clean nickel silver clippings, plate, rod and forgings, and other rolled shapes, free of chrome or any other plating material. Must be sold on nickel content specifications such as 10% — 12% — 15% — 18% — 20%. Leaded nickel silver clippings should be packed and sold separately. A description as to its physical characteristics should be made in offering all nickel silver material.

Malar — New Segregated Nickel Silver Clippings Shall consist of one specified nickel silver alloy. Not to contain more than 10 % of clean punchings under ¼ inch.

Malic 104— Old Nickel Silver Shall consist of Old Nickel Silver Sheet, Pipe, Rod, Tubes, Wire, Screen, soldered or unsoldered. Must not be trimmed seams alone and it is also to be free of foreign substances, iron rimmed materia1 or other metals.

Naggy — Nickel Silver Castings To be packed and sold separately.

Niece — Nickel Silver Turnings To be sold by sample or analysis.

Obole — Ferro Nickel Chrome Iron Scrap Shall consist of alloys containing: 12 % chrome minimum 12 % nickel minimum 0,50 % copper maximum Free of other foreign elements. Material shall be sold on basis of description and analysis. This category excludes all stainless steel grades which are covered elsewhere.

Peach — Ferro-Nickel-Iron Shall consist of alloys containing only nickel and iron. Minimum nickel content shall be 20 %, maximum copper 0,50 %. Material shall be sold on basis of description and analysis.

Pekoe — Chrome-Nickel-Manganese Chrome-Nickel-Manganese scrap of the following analysis: 16 - 19 % Chrome 3,5 - 6 % Nickel 5,5 - 10 % Manganese Material to be free of harmful contaminants and ho prepared to consumer’s specifications.

Sabot — Stainless Steel Scrap 18-8 stainless steel scrap shall consist of clean scrap containing a minimum of 7 % nickel, 16 % chromium and have a maximum of 0,50 % molybdenum, 0,50 % copper, 0,045 % phosphorous and 0,03 % sulphur and otherwise free of harmful contaminants. Material to be prepared to individual consumer’s specifications.

Taffy — Stainless Steel Castings Stainless steel castings submit analysis, size of pieces and physical description.

Ultra — Stainless Steel Turnings 18-8 turnings, machine shop grade for direct mill delivery shall contain a minimum of 70% nickel and 16 % chromium and be free of all non-ferrous metals, non-metallics, excessive iron, oil and harmful contaminants.

Ultra Crush — Short or Crushed Stainless Steel Turnings Crushed or short turnings to conform chemically to the machine shop grade specifications.

Rusten — 11-14 % Chrome Stainless Scrap Straight chrome stainless scrap shall contain 11 - 14 % chrome, phosphorous and sulphur 0,03 % maximum, and shall not contain over 0,50 % nickel and otherwise be free from harmful contaminants. Material to be prepared to individual consumer’s specifications.

Rusthirty — 14-18 % Chrome Stainless Scrap Straight chrome stainless scrap shall contain 14 - l8 % chrome, phosphorous and sulphur 0,03 % maximum, and shall not contain over 0,50 % nickel and otherwise ho free from harmful contaminants. Material to be prepared to individual consumers specifications.

Vaunt — Edison Batteries To be sold by type and to be free of crates and liquid.

Nadir — High-Nickel Scrap Shall consist of nickel-steel billet, bloom, bar crops, or other shapes of similar section and equal grade, not over 0,04 per cent of phosphorous or sulphur, between 3 per cent and 3,5 per cent of nickel (lower or higher in nickel content to be duly considered), free from other alloys. Must be clean material. Size of material to be agreed upon between buyer and seller.

Natty — No. 1 Chromium-Nickel Shall consist of chromium-nickel steel billet, bloom, bar crop, or other shapes of similar section and equal grade, not over 0,04 per cent of phosphorous or sulphur, between 3 and 3,5 per cent of nickel (lower or higher nickel content to be duly considered), not over 0,5 per cent of chromium, free from other alloys. Must be clean material. Size of material to be agreed upon between buyer and seller.

Negus — No. 2 Chromium-Nickel Shall consist of chromium-nickel steel billet, bloom, bar crops, or other shapes of similar section and equal grade, not over 0,04 per cent of phosphorous or sulphur, between 1,5 and 2,5 per cent of nickel (lower or higher nickel content to be duly considered), between 0,5 and 1 per cent of chromium, free from other alloys. Must be clean material. Size of material to be agreed upon between buyer and seller.

Nave — Nickel-Steel Turnings Shall consist of heavy short first-cut turnings from nickelsteel forgings. Nickel and chromium content to be specified on each individual sale. To weigh not less than 75 pounds per cubic foot. To be free from dirt and other foreign materials.